Lysol Power Toilet Bowl Cleaner – 24 oz

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read the entire label before using this product. To Open Child Resistant Cap: Hold bottle firmly with one hand on a flat surface. With other hand squeeze sides of cap where indicated while turning counterclockwise. Avoid squeezing bottle when opening. To reseal, twist cap clockwise until tightly closed. To Clean and Disinfect Follow These Easy Steps: 1. Flush first and remove excess dirt and grime before cleaning and disinfecting. 2. Wet all surfaces of bowl interior, including sides of bowl and under the rim, with at least 4 oz of liquid (squeeze bottle approximately 15 seconds). 3. Let soak for at least 10 minutes. Do not close toilet bowl lid. 4. Brush entire bowl thoroughly with a bowl brush and flush. 5. Rinse brush in fresh water after use. To Remove Tough Stains: Apply a generous amount of liquid directly onto the tough stains. For severe rust stains, if possible, remove water from bowl before applying liquid. Let soak for 15 minutes. Do not close toilet bowl lid. Brush entire bowl thoroughly with a bowl brush and flush. Rinse brush in fresh water after use. Repeat if necessary. Lysol Brand Disinfectant Toilet Bowl Cleaner has been specially formulated for use only in toilet bowls. It should not be used or placed on toilet bowl lids, vanities, sinks, bathtubs, cabinets, counter tops, rugs, etc. Clean up spills and drips immediately. Do not use with chlorine bleach or any other chemical products. Will not harm plumbing or septic systems. Fumes are corrosive to metal. Storage and Disposal: Store in original container out of reach of small children. Keep securely closed in a cool, well-ventilated area. Do not reuse empty container. Discard in trash.